TRAINING OFFERED BY OUR ASSOCIATE PARTNERS

Air Conditioning Contractors of America-National Capital Chapter®

You are the Hit Counter visitor preparing to see what training is being offered by ACCA-NCC's associate partners.  Some may have participation restrictions; check with the company directly for space availability and more information.  You can click directly on the company's name to be directed to their website.

ACCA-National Capital Chapter
ACCA-National
Aireco   
ASAP Compressors 
Boland Trane 
Lyon, Conklin & Co. 
2/16/10
R. E. Michel Co.  
United Products Distributors (UPD) 
 

 

 

 

 

 

 

**********************************************************************************************************************************

Aireco logo(click on Aireco's logo to be directed to their website)
        (for all training call 800-220-1991 x 248)

Copeland Refrigeration & A/C Scroll Technology, March 9, 2010, Roanoke, VA
Copeland System Approach to Mechanical Compressor Failures, March 23, 2010, Midlothian, VA
Copeland Refrigeration & A/C Scroll Technology, March 30, 2010, Woodbridge, VA
Copeland Refrigeration & A/C Scroll Technology, April 7, 2010, Gaithersburg, MD
Copeland Refrigeration & A/C Scroll Technology, April 20, 2010, Millersville, MD

 

 

 

 

ASAP logo  (click on ASAP's logo to be directed to their website)
        (for all training call 410-752-1700; all classes held in Baltimore, MD)

Compressors:  Start-Up, Field Service and Failures, March 23, Baltimore, MD (NATE approved for 8 hours of CEU)
Compressor Teardown Night, March 25, Baltimore, MD
Compressors:  Start-Up, Field Service and Failures, March 30, Forge, VA (NATE approved for 8 hours of CEU)
Compressor Teardown Night, March 31, Providence Forge, VA

 

 

     (click on Boland's logo to be directed to their website) 
        (for all training call 240-306-3001; all classes held in Gaithersburg, MD)

NOTE:  All ACCA-NCC members get 10% discount off registration fees (mention it in the comments section of the registration page in order for it to be applied.)

Tracer Summit System Operations, March 2-5, 2010
Basic HVAC, March 10-11, 2010
Diagnosing Compressors, March 16, 2010
Refrigerant Reclaiming Course, March 17, 2010
CFC Review and Testing, March 18, 2010
Intellipak Rooftops, March 23, 2010
Air Screw Chillers, March 24, 2010
Multistack, March 25, 2010
Boiler Systems, March 30, 2010
Centrifugal Chillers, April 1, 2010
Voyager Rooftops, April 6, 2010
Understanding Schematics & Wiring Diagrams, April 7, 2010
Self-Contained Units, April 8, 2010
Motors, April 20, 2010
R-410A Training & Testing, April 22, 2010
CFC Training & Testing, April 22, 2010
Intermediate Tracer Summit, May 4, 2010
Variable Air Volume, May 5-6, 2010
Variable Frequency Drive Theory, May 11, 2010

 

 

 

(click on Lyon, Conklin & Co's logo to be directed to their website) 
        For more information call 410-540-2800

Comfort Link II and Charge Assist, March 2, 2010, New Castle, DE
Comfort Link II and Charge Assist, March 4, 2010, Lancaster, PA
Comfort Link II and Charge Assist, March 9, 2010, Hagerstown, MD
Air Conditioning Service, Comfort Link II & Modulating Gas Furnaces, March 10, 2010, Chantilly, VA
Heat Pump Installation & Service, March 11, 2010, Beaver, WV
Comfort Link II and Charge Assist, March 15, 2010, Elkridge, MD
TXV Controlled System Diagnosis, March, 19, 2010, Poca, WV
Air Conditioning Service, Comfort Link II & Modulating Gas Furnaces, March 16, 2010, Capitol Heights, MD
Modulating Gas Furnace Installation & Service, March 17, 2010, New Castle, DE
ReliaTel Controls, March 18, 2010, Poca, WV
Air Conditioning Service, Comfort Link II & Modulating Gas Furnaces, March 23, 2010, White Plains, MD
Comfort Link II and Charge Assist, March 24, 2010, North Wales, PA
Heat Pump Installation & Service, March 25, 2010, Fairmont, WV
Modulating Gas Furnace Installation & Service, March 31, 2010, Elkridge, MD
Heat Pump Installation & Service, April 1, 2010, Poca, WV
Air Conditioning Installation & Service, April 1, 2010, Pittston, PA
TXV Controlled System Diagnosis, April 5, 2010, Chantilly, VA
Modulating Gas Furnace Installation & Service, April 6, 2010, North Wales, PA
ReliaTel Controls, April 6, 2010, Chantilly, VA
TXV Controlled System Diagnosis, April 7, 2010, Capitol Heights, MD
Comfort Link II and Charge Assist, April 7, 2010, Chantilly, VA
Getting Ready for Air Conditioning Season, April 7, 2010, Capitol Heights, MD
TXV Controlled System Diagnosis, April 8, 2010, Elkridge, MD
Getting Ready for Air Conditioning Season, April 8, 2010, Elkridge, MD
Comfort Link II and Charge Assist, April 8, 2010, Dagsboro, DE
Modulating Gas Furnace Installation & Service, April 13, 2010, Hagerstown, MD
Duct Design, April 15, 2010, Poca, WV
Duct Design, April 22, 2010, Fairmont, WV

 

RE Michel LogoR. E. Michel Company (click on R. E. Michel's logo to be directed to their website)
        For more information call 410-553-3835

R410A Guidelines, March 1, 2010, Glen Burnie, MD
A/C Fundamentals, March 2-4, 2010, Glen Burnie, MD
CFC Certification, March 29, 2010, Glen Burnie, MD
A/C Service Troubleshooting, March 30-April 1, 2010, Glen Burnie, MD
CFC Certification, April 29, 2010, Glen Burnie, MD
CFC Certification, April 30, 2010, Richmond, VA
CFC Certification, May 31, 2010, Glen Burnie, MD
CFC Certification, June 28, 2010, Glen Burnie, MD

NOTE: 
    R410a classes have two sessions at 9am and 1pm
    All other classes begin at 8am
    Oil/Gas Combustion and A/C Service and Troubleshooting classes are hands-on

 

 

UPD Logo  (click on York/United Products Distributors name to be directed to their website)
    
(for all training call 410-866-6800)

Basic Gas Heating & Modulating Furnace, March 3, 2010, Delaware
Duct Design & Measurements, March 16, 2010, Dulles, VA
UPD - Kold-Draft Servicing School, March 16, 2010, Dulles, VA
Design and Application, March 16, 2010, Annapolis, MD
UPD - Kold-Draft Servicing School, March 17, 2010, Rosedale, MD
UPD - Kold-Draft Servicing School, March 18, 2010, Salisbury, MD
Basic Gas Heating & Modulating Furnace, March 18, 2010, Rosedale, MD
City Multi Diamond Designer, March 23, 2010, Baltimore, MD
City Multi S Designer Class, March 25, 2010, Vienna, VA
Duct Design & Measurements, April 1, 2010, Rosedale, MD
York Factory Trip, April 6-8, 2010, Wichita, KS
Basic Gas Heating & Modulating Furnace, April 15, 2010, Dulles, VA
Quest for Success, Session I, April 20-21, 2010, Baltimore, MD
York Predator Roof Top Systems, April 22, 2010, Rosedale, MD
Hi-Velocity Systems, Factory, Dealer Certification Training Seminar, April 26, 2010, Dulles, VA
Hi-Velocity Systems, Factory, Dealer Certification Training Seminar, April 27, 2010, Rosedale, MD
Viessmann - Solar Selling, April 27, 2010, Greenbelt, MD
Product Overview, April 28, 2010, Annapolis, MD
Product Overview, April 29, 2010, Dulles, MD
York Predator Roof Top Systems, April 29, 2010, Salisbury, MD
Duct Design & Measurements, April 31, 2010, Salisbury, MD
City Multi Diamond Designer, June 3, 2010, Greenbelt, MD
Quest for Success, Session II, August 24-25, 2010, Baltimore, MD
City Multi S Designer Class, September 16, 2010, Baltimore, MD
City Multi Diamond Designer, September 21, 2010, Annapolis, MD
Basic System Design, Psychometrics, September 21, 2010, Baltimore, MD
Basic Heat Pump & Air Conditioning, September 22, 2010, Dulles, VA
Basic System Design, Cooling & Heating Load Components, September 23, 2010, Baltimore, MD
Design and Application, September 28, 2010, Dulles, VA
York Factory Trip, September 28-30, 2010, Wichita, KS
Basic System Design, Cooling & Heating Load Estimate, September 28, 2010, Baltimore, MD
Basic System Design, Cooling & Heating Load Estimate, September 30, 2010, Baltimore, MD
Basic System Design, The Refrigeration Cycle, October 5, 2010, Baltimore, MD
Basic Heat Pump & Air Conditioning, October 5, 2010, Delaware
Basic Heat Pump & Air Conditioning, October 6, 2010, Rosedale, MD
Basic System Design, HVAC Systems Concepts, October 7, 2010, Baltimore, MD
Basic System Design, Refrigerant Cooling Systems, October 12, 2010, Baltimore, MD
City Multi Controls 1, October 12, 2010, Salisbury, MD
City Multi Controls 1, October 13, 2010, Annapolis, MD
Basic System Design, Hydronic Cooling Systems, October 14, 2010, Baltimore, MD
Basic Gas Heating & Modulating Furnace, October 14, 2010, Easton, MD
Viessmann - Selling Boilers, October 19, 2010, Rosedale, MD
Basic System Design, Fans and Coils, October 19, 2010, Baltimore, MD
Viessmann - Selling Boilers, October 20, 2010, Salisbury, MD
Basic System Design, Equipment Selection, October 21, 2010, Baltimore, MD
Viessmann - Selling Boilers, October 21, 2010, Dulles, VA
Duct Design & Measurements, October 26, 2010, Dulles, VA
Basic System Design, Controls Methods & Devices, October 26, 2010, Baltimore, MD
Basic System Design, Zones Systems, October 28, 2010, Baltimore, MD
Mitsubishi M & P Series Service Training, November 3, 2010, Easton, MD
Basic Gas Heating & Modulating Furnace, November 4, 2010, Rosedale, MD
Duct Design & Measurements, November 9, 2010, Salisbury, MD
Mitsubishi M & P Series Service Training, November 16, 2010, Dulles, VA
Quest for Success, Session III, November 16-17, 2010, Baltimore, MD
Duct Design & Measurements, November 18, 2010, Rosedale, MD
Basic Gas Heating & Modulating Furnace, November 22, 2010, Dulles, VA
York Predator Roof Top Systems, November 29, 2010, Rosedale, MD

 

 

Click here for training offered by ACCA-NCC: Air Conditioning Contractors of America-National Capital Chapter

 

Click here for training offered by ACCA-National: Air Conditioning Contractors of America

 

 

Statements, class availability and materials found in any of the above links are not expressions of this web site (except for ACCA-NCC's link). They are provided as a service to the reader.